COMMENT ⊗   VALID 00002 PAGES
C REC  PAGE   DESCRIPTION
C00001 00001
C00002 00002	This is a recording of the creation of TOPS-10 parameter files to describe
C00021 ENDMK
C⊗;
;This is a recording of the creation of TOPS-10 parameter files to describe
;the WAITS configuration.  Many of the answers to questions are pure guesses.
;If important, they should be redone with the correct information.

ex mongen
Swapping to SYS:LOADER.DMP
LOADING

LOADER 20 PAGES
EXECUTION
MONGEN for 701 monitors
/HELP(PROMPT,SHORT,LONG)]: long
%Can't find FGEN.HLP
Which GEN(HDW,TTY,NET,F)[
HDW to define hardware configuration
TTY to define terminal configuration
NET to define network configuration
F to define software features]: hdw
Output(DSK:HDWCNF.MAC): hdwcnf.wts
DECsystem10(1070,1080,1090,1091,2020)[
1070 is a system with KI10 cpu's
1080 is a system with KL10 cpu's
1090 is a system with KL10 cpu's and internal channels
1091 is a system with a KL10 cpu, internal memory, and devices
 on the front end
2020 is a system with a KS10 cpu]: 1080
Cpu's(1,1-4)[Total number of cpu's in the system]: 1
System name[24 characters or less]: SU-AI WAITS
ARPA Host name[14 characters or less]: SAIL
Host number on IMP(1): 0/11
? Type single number followed by carriage return
Host number on IMP(1): 0
IMP number(47): 11
CPU0 serial #(1-10000): 1234
Exclude monitor overhead from user run time(Y,N)[
Overhead is CPU time spent clock queue processing, command
decoding, swapping, and scheduling.
User run time always includes UUO execution and
unless EBOX/MBOX runtime accounting is selected
(KL10 systems only) includes IO interrupt service time.
On KI systems, each CPU must have a DK10]: y
EBOX/MBOX runtime accounting?(Y,N)[
If EBOX/MBOX runtime accounting is selected in a KL10
based system, user runtime is computed using the KL10
internal accounting clocks]: y
Exclude PI time from user runtime?(Y,N)[
An answer of "yes" to this question will cause the monitor
to set up the KL10 accounting meters in such a manner that
users will not be charged for cpu time used during interrupts]: n
Account verification(Y,N)[LOGIN and the batch system will
verify that the user has specified a valid account]: n
# Data Channels on CPU0(2,0-?)[DF10s, DF10Cs, DX10s OR RH20'S  for disk and tape]: 
Channel 0 Type (DF10,DF10C,DX10,RH20): df10
On channel # 0:
  # RC10s(0-2)[Controllers for RD10 Burroughs disks and
RM10B Bryant drums on channel 0]: 
? No default allowed, type a number
  # RC10s(0-2)[Controllers for RD10 Burroughs disks and
RM10B Bryant drums on channel 0]: 0
  # RH10S for RS04'S(0-3)[Controllers for RS04 swapping
disks on channel 0]: 2
  # Units on FSA(1-8): 0
? Must be in range 1-8
  # Units on FSA(1-8): 1
  # Units on FSB(1-8): 1
  # RH10S for RP04'S,RP06'S(0-3)[Controllers for RP04,RP06
disk pack units on channel 0]: 0
  # RP10s(0-3)[Controllers for Memorex and ISS RP02 and RP03 
disk pack units on channel 0]: 0
  # TM10Bs(0-2)[Tape Controller for NRZI only drives
on channel  0]: 0
  # RH10's for TM02'S (0-2)[Mass-Bus tape controller for
TU16's and TU45's on channel 0]: 0
Channel 1 Type (DF10,DF10C,DX10,RH20): df10
On channel # 1:
  # RC10s(0-2)[Controllers for RD10 Burroughs disks and
RM10B Bryant drums on channel 1]: 0
  # RH10S for RS04'S(0-3)[Controllers for RS04 swapping
disks on channel 1]: 0
  # RH10S for RP04'S,RP06'S(0-3)[Controllers for RP04,RP06
disk pack units on channel 1]: 0
  # RP10s(0-3)[Controllers for Memorex and ISS RP02 and RP03 
disk pack units on channel 1]: 0
  # TM10Bs(0-2)[Tape Controller for NRZI only drives
on channel  1]: 0
  # RH10's for TM02'S (0-2)[Mass-Bus tape controller for
TU16's and TU45's on channel 1]: 0
 # TM10As on CPU0(0,0-2)[I/O Bus type Controller for NRZI only drives]: 0
# DTEs on CPU0(2,1-4)[Byte transfer device used for KL10 to PDP-11 front end communications]: 0
? Must be in range 1-4
# DTEs on CPU0(2,1-4)[Byte transfer device used for KL10 to PDP-11 front end communications]: 1
  # terminals on the master front end on CPU0(0,0-128)[include
only timesharing (DH11) lines, not CTY or KLINIK]: 1
  # line printers on the master front end on CPU0(0,0-2): 0
  # card readers on the master front end on CPU0(0,0-1): 0
# Jobs(1-511)[Maximum number attached and detached, not
counting null job]: 69
Maximum P of core for each job(0,0-512)[0 means all of core]: 510
# K total system core(128-4096)[ONCE-only reports if
less core at startup]: 2304
Clock ticks per second(60,50)[Power line frequency]: 60
# Real-time devices(0,0-77)[Max. # which can be put
on PI channels simultaneously]: 5
# Pages min guaranteed among jobs not locked in core(0,0-512)[
minimum free core pool for unlocked jobs, 0 assumes all of core]: 
# High priority queues(0,0-15): 
Meter(Y,N)[Performance analysis metering(METER UUO)]: n
SYSCHK(Y,N)[Initial hardware integrity check at ONCE-only time]: n
KASER(Y,N)[Include support for simulation of KA10
long floating point instructions]: n
MSGSER(Y,N)[Support for device MPX. (more than one device
on an I/O channel). This feature is required for MCS-10].: n
PSISER(Y,N)[Advanced programmed software interrupt service -
Support for the PISYS. UUO. This provides an easy
and powerful interrupt method for program to trap asynchronous
events. Required by MCS-10]: n
IPCF(Y,N)[Inter process communication facility]: n
ENQ/DEQ(Y,N)[Sychronization primitives to allow
simultaneous file update by multiple co-operating processes]: n
Monitor resident BOOTS(Y,N)[Core resident BOOTS
allowing fast dump/reload, and continuable STOPCD dump, etc.]: n
# CDRs(1,0-2)[Card reader on the I/O Bus]: 0
CDP(Y,N)[Card punch]: n
DIS(Y,N)[Display device(VP10,340,30,VB10C) as distinguished from
display terminals]: n
# TD10s(1,0-2)[DECtape controls]: 0
LPTs(1,0-3)[Line printers on the I/O Buss]: 0
PLTS(0,0-2)[Plotters]: 0
PTP(Y,N)[Paper tape punch]: y
PTR(Y,N)[Paper tape reader]: y
# of DA28s(0,0-4)[Interprocessor channels for PDP8/11/15]: 0
# DN60'S(0,0-11)[IBM BSC INTERFACES]: 0
# PTYs(20,0-510)[Pseudo-terminals - each operator
service program and Batch stream needs one]: 
# IMPS (20,0-127)[IMP ports - number of (software)
connections available to the ARPA network]: 
# ITY'S(10,0-63)[IMP ITY's - number of semi-pseudo
TTY's available for Telnet users from the ARPA network]: 
Decimal "symbol,value"[
For any symbols to be defined.
Type one per line, extra carriage return when through]


Octal "symbol,value"[
For any symbol to be defined.
Type one per line, extra carriage return when through]


SIXBIT "symbol,value"[
For any sixbit symbol to be defined.
Type one per line, extra carriage return when through]

Type "device-mnemonic,PI-channel" for special devices[
With neither channel AC save routine nor device data block,
the "device-mnemonic" must be 3 characters or less.
Type extra carriage return when through.]

Type "device-mnemonic,PI-channel,no.-of-devices"[
For special devices with device data blocks.
the "device-mnemonic" must be 3 characters or less.
Type extra carriage return when through.]

Type "device-mnemonic,PI-channel,highest-ac-to-save"[
For special devices with channel save routines to save acs up to
the "highest-ac-to-save".  "Device" must be 3 char or less.
Type extra carriage return when through.]

Type "ersatz-device,P,Pn,search-list-type"[
For customer defined ersatz devices.
The "esratz-device" must be exactly 3 characters long.
"P,Pn" is the Project/Programmer number associated.
"search-list-type" is one of ALL,SYS,JOB.
Type extra carriage return when through.]

File DSK:HDWCNF.WTS Closed [HDWGEN finished]

%Can't find FGEN.HLP
Which GEN(HDW,TTY,NET,F)[
HDW to define hardware configuration
TTY to define terminal configuration
NET to define network configuration
F to define software features]: tty
Output(DSK:TTYCNF.MAC): ttycnf.wts
DECsystem10(1070,1080,1090,1091,2020)[
1070 is a system with KI10 cpu's
1080 is a system with KL10 cpu's
1090 is a system with KL10 cpu's and internal channels
1091 is a system with a KL10 cpu, internal memory, and devices
 on the front end
2020 is a system with a KS10 cpu]: 1080
Cpu's(1,1-4)[Total number of cpu's in the system]: 1
How many DC10s on CPU0(1,0-2)[
The DC10 is a data line scanner]: 
How many DC68s on CPU0(1,0-2)[
The DC68 is a PDP-8 680 or 680I communications system]: 0
How many DC76s on CPU0(1,0-8)[
The DC76 is a PDP-11 communications system]: 0

For DC10 0:

# DC10B[ or 632] 8 line data groups(1-8)[
1 is TTY0-7, 2 is TTY0 - 17, ... 8 is TTY0 - 77]: 1
# DC10E Data set control groups(0-1): 0
OPR octal line #(CTY,0-0)[OPR is privileged operator terminal]: 
Answer the following questions about your TTY lines(M-N).
[Type one octal line #(M) or one range(M-N) or CTY on separate
lines.  Type extra carriage return when through.]
Data set lines[Class of terminal for LOGIN, LOGIN resets line
to computer echoing and no hardware tabs]

Lines with hardware tabs[Monitor simulates rest with spaces]

Remote lines[Class of terminal for LOGIN, do not confuse
with remote station TTYs]

Local copy lines[Echoing provided by terminal rather than
by computer.  Often (incorrectly) called half duplex]

Half duplex lines[TWX or half duplex wired scanner(DC10C)]

Slaves[No commands may be typed]

Lines with hardware form feed[Leave out if users
would rather not get form feeds until they do TTY FORM commands]

Lines which run INITIA at startup

Filler class codes(M-N,P)[
Type M,P for one line M with filler class code P or
M-N,P for a range of lines with filler class code P]

2741 lines on DC-10 interfaces[]

File DSK:TTYCNF.WTS Closed [TTYGEN finished]

%Can't find FGEN.HLP
Which GEN(HDW,TTY,NET,F)[
HDW to define hardware configuration
TTY to define terminal configuration
NET to define network configuration
F to define software features]: net
Output(DSK:NETCNF.MAC): netcnf.wts
Network software(Y,N)[
Software to support remote computers: DECsystem-10's,
PDP-11's, PDP-8's (requires FTNET to be -1)]: y
Cpu's(1,1-4)[Total number of cpu's in the system]: 1
How many DC75NP's or DN87's on CPU0(1,0-8)[Network
front-ends connected to DL10's.]: 
For front end number 1:
To which DL10 port is the DC75 or DN87 connected (0,0-7)[]: 
How many DN87S's on CPU0(1,0-3)[Network
front-ends connected to DTE-20's]: 
For front end number 2:
To which DTE20 is the DN87S connected (1,1-3)[]: 
Node number of central site(1,1-77)[
Unique octal number identifying system to network.]: 
Name of central site[Six characters or less.]: 
# of remote TTY's(1,1-512)[
Maximum number of teletypes on network nodes to be
handled at any given time.]: 
Network virtual terminals(Y,N)[
Code to allow local terminals to "SET HOST" to other systems.]: n
Remote card readers(Y,N)[
Code to allow access to card readers on remote stations.]: n
Remote line printers(Y,N)[
Code to allow access to line printers on remote stations.]: n
Remote data entry terminals(Y,N)[
Code to allow access to remote data entry terminals (RDX devices).]: n
Remote task-to-task(Y,N)[
Code to allow access to remote jobs (TSKSER).]: n
# of connects(256,1-512)[
Maximum number of simultaneous connections.]: 
File DSK:NETCNF.WTS Closed [NETGEN finished]

%Can't find FGEN.HLP
Which GEN(HDW,TTY,NET,F)[
HDW to define hardware configuration
TTY to define terminal configuration
NET to define network configuration
F to define software features]: f
Output(DSK:F.MAC): f.wts
Feature set(KIFULL,KLFULL,KSFULL)[
KIFULL Includes all Tops-10 features supported for KI10 based systems
KLFULL	Same as KIFULL but for KL10 based systems
KSFULL  Same as KIFULL but for KS10 based systems]: klfull
Standard setting(YES,NO,LIST,EXPLAIN)[
Standard values for all feature test switches for your configuration]: yes
% Can't find file header in help file
File DSK:F.WTS Closed [FGEN finished]

%Can't find FGEN.HLP
Which GEN(HDW,TTY,NET,F)[
HDW to define hardware configuration
TTY to define terminal configuration
NET to define network configuration
F to define software features]: ↑C
↑C

.